Pablo Software Solutions Forum Index Pablo Software Solutions

 
 FAQFAQ   SearchSearch   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

remote pasv not working for me any more

 
Post new topic   Reply to topic    Pablo Software Solutions Forum Index -> Quick 'n Easy FTP Server
View previous topic :: View next topic  
Author Message
afreeve



Joined: 23 Nov 2012
Posts: 2
Location: Canada

PostPosted: Tue Nov 27, 2012 2:00 pm    Post subject: remote pasv not working for me any more Reply with quote

I have been using the software for a couple of years, server hardware finally died and had to be replaced. I think I have done everything correctly but must be missing something.

Active ftp works fine within my local network. But I cannot get through pasv mode from outside. Using the gene6 tester I get:

* About to connect() to reeveftp.no-ip.com port 21 (#0)
* Trying 65.94.198.178... connected
* Connected to reeveftp.no-ip.com (65.94.198.178) port 21 (#0)
< 220 Welcome to Quick 'n Easy FTP Server

> USER reevexfer
< 331 Password required for reevexfer

> PASS *****
< 230 User successfully logged in.

> PWD
< 257 "/" is current directory.
* Entry path is '/'

> CLNT Testing from http://www.g6ftpserver.com/ftptest from IP 65.94.198.178
< 502 Command not implemented - Try HELP.
* QUOT command failed with 502
* Closing connection #0

curl: (21) QUOT command failed with 502

and the user is disconnected.

Using the ftptest.net tester I get:


Status: Resolving address of reeveftp.no-ip.com

Status: Connecting to 65.94.198.178

Status: Connected, waiting for welcome message

Reply: 220 Welcome to Quick 'n Easy FTP Server

Command: CLNT http://ftptest.net on behalf of 65.94.198.178

Reply: 530 Please login with USER and PASS.

Command: USER reevexfer

Reply: 331 Password required for reevexfer

Command: PASS *******

Reply: 230 User successfully logged in.

Command: SYST

Reply: 215 UNIX emulated by Quick 'n Easy FTP Server.

Command: FEAT

Reply: 211-Extensions supported

Reply: SIZE

Error: FEAT response lines must begin with a single space character

and the user is disconnected.

I have tried both putting the server in DMZ and completely disabling the windows firewall on the server, but I still can't connect. I am hoping it is something simple...I don't pretend to be an expert on this stuff. Thx.
_________________
Andrew
Back to top
View user's profile Send private message
admin
Site Admin


Joined: 13 Apr 2005
Posts: 1472

PostPosted: Wed Nov 28, 2012 7:35 pm    Post subject: Reply with quote

This is mosty likely a firewall or router configuration issue.
The clue should be in the server log.

Please read these related articles for more details:
http://www.pablosoftwaresolutions.com/supportforum/viewtopic.php?t=465
http://www.pablosoftwaresolutions.com/supportforum/viewtopic.php?t=76
Back to top
View user's profile Send private message Send e-mail
afreeve



Joined: 23 Nov 2012
Posts: 2
Location: Canada

PostPosted: Thu Nov 29, 2012 9:22 pm    Post subject: Reply with quote

Got it working again. I replaced the router (Dlink EBR-2310) with an old Dlink DIR-615 I had laying around, configured it with the exact same parameters, and suddenly it works. Still not sure why the EBR-2310 worked with the old ftp server, but you can't argue with success!
_________________
Andrew
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Pablo Software Solutions Forum Index -> Quick 'n Easy FTP Server All times are GMT + 1 Hour
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


SwiftBlue Theme created by BitByBit
Powered by phpBB © 2001, 2002 phpBB Group