Pablo Software Solutions Forum Index Pablo Software Solutions

 
 FAQFAQ   SearchSearch   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

router issue

 
Post new topic   Reply to topic    Pablo Software Solutions Forum Index -> Quick 'n Easy FTP Server
View previous topic :: View next topic  
Author Message
bdon



Joined: 04 Aug 2005
Posts: 3

PostPosted: Thu Aug 04, 2005 6:57 pm    Post subject: router issue Reply with quote

I have my ftp behind a linksys router. I seem to have every setting correct. The client connects password and username are confirmed then when the server goes /pasv. The client is disconnected from the router.

I have experimented with different server and client programs. All with the same result. I normally use the Quick and Easy 2.7.1 and would like to keep doing so.

Does anyone know of a security setting on the router that would cause it to boot the client after the mode switches?
Back to top
View user's profile Send private message
admin
Site Admin


Joined: 13 Apr 2005
Posts: 1470

PostPosted: Thu Aug 04, 2005 7:27 pm    Post subject: Reply with quote

Did you configure the server using the setup wizard?

Did you read these instructions?
http://www.pablosoftwaresolutions.com/forum/viewtopic.php?t=76
Back to top
View user's profile Send private message Send e-mail
bdon



Joined: 04 Aug 2005
Posts: 3

PostPosted: Thu Aug 04, 2005 7:54 pm    Post subject: Reply with quote

OH yes. I have done all of that. Like I said the server and client connect.

Here is the log

14:52:58.437 [1092] FTP Server started on port 21.
14:53:19.359 [3872] Client connected from 192.168.1.1.
14:53:19.359 [3872] 220 Welcome to Quick 'n Easy FTP Server
14:53:19.359 [3872] USER clemtown
14:53:19.359 [3872] 331 Password required for clemtown
14:53:19.375 [3872] PASS ****
14:53:19.375 [3872] 230 User successfully logged in.
14:53:19.375 [3872] SYST
14:53:19.375 [3872] 215 UNIX emulated by Quick 'n Easy FTP Server.
14:53:19.375 [3872] FEAT
14:53:19.375 [3872] 211-Extensions supported SIZE MDTM XCRC 211 END
14:53:19.406 [3872] PWD
14:53:19.406 [3872] 257 "/" is current directory.
14:53:19.406 [3872] TYPE A
14:53:19.406 [3872] 200 Type set to ASCII
14:53:19.421 [3872] PASV
14:53:19.421 [3872] 227 Entering Passive Mode (192,168,1,1,0,22)
14:53:19.421 [3872] Client disconnected from 192.168.1.1.


The client software just gets kicked. It never gets a list of directories
Back to top
View user's profile Send private message
admin
Site Admin


Joined: 13 Apr 2005
Posts: 1470

PostPosted: Thu Aug 04, 2005 8:57 pm    Post subject: Reply with quote

Here are a few tips:
1. You did not correctly setup passive mode.
Please make sure the PASV mode ip address is correctly setup if you want users outside your local network to be able to connect to your server.
2. Do not use PASV mode if you connect from your local network, turn passive mode off in your FTP client.
3. The server does not kick you off, it just doesn't create the data the connection because you did not configure it correctly.
4. Since you are using a router select 'Get ip address from remote server'
You have either selected 'Default' or '192.168.1.1', this will not work if your PC is on a LAN.
5. Did you forward all FTP related ports on your router?

For more information read the help file, other related topics on the forum and the FAQ.
Back to top
View user's profile Send private message Send e-mail
bdon



Joined: 04 Aug 2005
Posts: 3

PostPosted: Sat Aug 06, 2005 12:02 am    Post subject: Reply with quote

well taking the clients out of pasv mode worked. I am semi confused why. I thought since I was behind a router with the ports forwarded they would have to be set pasv.

But thanks for helping me out. I like the new lite 3.0. Your software is very user friendly. I see the pro version you can control download speed. What speeds are the lite version set at?
Back to top
View user's profile Send private message
admin
Site Admin


Joined: 13 Apr 2005
Posts: 1470

PostPosted: Sat Aug 06, 2005 1:49 pm    Post subject: Reply with quote

It's always difficult to explain the PASV vs. PORT mode.
If you want to know more about it go to:
http://slacksite.com/other/ftp.html for a definitive explanation.

The lite version download/upload speed is set to unlimited.
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    Pablo Software Solutions Forum Index -> Quick 'n Easy FTP Server All times are GMT + 1 Hour
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


SwiftBlue Theme created by BitByBit
Powered by phpBB © 2001, 2002 phpBB Group